Related Manuals for SHOWTEC Par 64 LED-120Z-Q4
Summary of Contents for SHOWTEC Par 64 LED-120Z-Q4
- Page 1 MANUAL ENGLISH Par 64 LED-120Z-Q4 Ordercode: 42540 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
Par 64 LED-120Z-Q4 Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Rigging .................................... 4 Connection with the mains............................5 Return Procedure ................................6 Claims ....................................6 Description of the device ..............................7 Frontside..................................7 Backside .................................. -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● Showtec Par 64 LED-120Z-Q4 ● 1 x color frame ●... - Page 4 ● If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
-
Page 5: Operating Determinations
Par 64 LED-120Z-Q4 Operating Determinations ● This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. ● The minimum distance between light output and the illuminated surface must be bigger than 1 meter. -
Page 6: Connection With The Mains
Par 64 LED-120Z-Q4 The Par can be mounted to any kind of truss with a clamp. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug. Always check if the right color cable is connected to the right place. -
Page 7: Return Procedure
Par 64 LED-120Z-Q4 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. -
Page 8: Description Of The Device
Par 64 LED-120Z-Q4 Description of the device Features The Par 64 LED-120Z-Q4 is a LED parcan fixture, with high output and great effects. ● Input voltage: 100-240V AC, 50/60Hz ● Power consumption: 142W ● Power factor: >0,8 ● DMX channels: 4, 7, 11 channels ●... -
Page 9: Backside
10) Ground/earth connection 11) Safety eye Installation Remove all packing materials from the Par 64 LED-120Z-Q4. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. -
Page 10: Color Frame Retaining Clip
Par 64 LED-120Z-Q4 Color Frame Retaining Clip 01) Press and hold down the color frame retaining clip. 02) Insert the color frame into the bracket. 03) Release the color frame retaining clip in order to secure the color frame in position. -
Page 11: Control Modes
Par 64 LED-120Z-Q4 Control Modes There are 4 modes: ● Color Macros/Color Programs ● Manual ● Master/Slave ● DMX-512 (4CH, 7CH, 11CH) One Par (Manual, Color Macros/Color Programs) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation. -
Page 12: Multiple Pars (Dmx Control)
Par 64 LED-120Z-Q4 Multiple Pars (DMX Control) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation 02) Always use a safety cable (ordercode 70140 / 70141). 03) Use a 3-pin XLR cable to connect the Pars and other devices. -
Page 13: Fixture Linking
Par 64 LED-120Z-Q4 Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support. -
Page 14: Control Panel
Par 64 LED-120Z-Q4 The Par 64 LED-120Z-Q4 can be operated with a controller in control mode or without the controller in stand-alone mode. Control Panel A) 4-digit LED display MENU button C) UP button D) DOWN button ENTER button Fig. 07 Control Mode The fixtures are individually addressed on a data-link and connected to the controller. -
Page 15: Menu Overview
Par 64 LED-120Z-Q4 Menu Overview Ordercode: 42540... -
Page 16: Main Menu Options
Par 64 LED-120Z-Q4 Main Menu Options Upon start-up the display will show . Press the MENU button to enter the main menu. 1. DMX-512 Mode 2. DMX Channel Modes 3. Master/Slave 4. Slave Modes 5. Color Macros/Color Programs 6. DMX Fail 7. -
Page 17: Dmx Channel Modes
Par 64 LED-120Z-Q4 2. DMX Channel Modes In this menu you can set the desired channel mode. 01) In main menu, press the MENU button until the display shows 02) Press the ENTER button to open the menu. 03) Press the UP/DOWN buttons to choose one of the 3 following channel modes:... -
Page 18: Color Macros/Color Programs
Par 64 LED-120Z-Q4 5. Color Macros/Color Programs In this menu you can set color macros and color programs. 01) In main menu, press the MENU button until the display shows 02) Press the ENTER button to open the menu. 03) Press the UP/DOWN buttons to choose one of the 10 options: 04) If you have chosen , press the ENTER button to open the menu. -
Page 19: Dimming Curves
Par 64 LED-120Z-Q4 7. Dimming Curves In this menu you can set the dimming curves. 01) In main menu, press the MENU button until the display shows 02) Press the ENTER button to open the menu. 03) Press the UP/DOWN buttons to choose one of the 4 dimming curves:... -
Page 20: Dimmer Speed
Par 64 LED-120Z-Q4 8. Dimmer Speed In this menu you can set the dimmer speed. 01) In main menu, press the MENU button until the display shows 02) Press the ENTER button to open the menu. 03) Press the UP/DOWN buttons to choose one of the 2 options:... -
Page 21: Test
Par 64 LED-120Z-Q4 12. Test In this menu you can start the automatic test. 01) In main menu, press the MENU button until the display shows 02) Press the ENTER button to start the test. The display will show 13. Temperature In this menu you can view the device’s temperature. -
Page 22: Channels
Par 64 LED-120Z-Q4 7 Channels Channel 1 – Red CH5 must be closed; CH6 must be open; CH7 must be set between 32-255 0-255 Gradual adjustment Red, from dark to brightest Channel 2 – Green CH5 must be closed; CH6 must be open; CH7 must be set between 32-255... - Page 23 Par 64 LED-120Z-Q4 Channel 5 – Color Macros CH7 must be open; CH9 must be set between 32-255; CH10 must be closed Not functional Color macro 1 Color macro 2 9-12 Color macro 3 ● ● ● ● ● ●...
-
Page 24: Maintenance
04) The electric power supply cables must not show any damages or material fatigue. The Par 64 LED-120Z-Q4 requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light output will be significantly reduced. Disconnect the mains power supply, and then wipe the cover with a damp cloth. -
Page 25: No Response To Dmx
Par 64 LED-120Z-Q4 No Response to DMX Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction. 01) Check the DMX setting. Make sure that DMX addresses are correct. 02) Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical power. -
Page 26: Product Specifications
Par 64 LED-120Z-Q4 Product Specifications Model: Par 64 LED-120Z-Q4 Input voltage: 100-240V AC, 50/60Hz Power consumption: 142W Fuse: T2AL/250V Dimensions: 445 x 290 x 400 mm (LxWxH) Weight: 3,8 kg Operating and Programming: Signal pin OUT: Pin 1 (earth), pin 2 (-), pin 3 (+) -
Page 27: Dimensions
Par 64 LED-120Z-Q4 Dimensions Ordercode: 42540... - Page 28 ©2019 Showtec...