Page 2
For more information: iwant@showtec.info You can get some of the best quality, best priced products on the market from Showtec. So next time, turn to Showtec for more great lighting equipment. Always get the best -- with Showtec ! Thank you!
Showtec Showtec LED Powerline 64 Product Guide ™ Warning...................………..…..………….….….………………………….. Safety-instructions…………………………………….………………………………….………………………..……. Operating Determinations.…………………………...…...….……………….….………………...….……………. Rigging.…………………………...…...….……………….………………………….………………...….……………. Return Procedure……………………………………………………………………………........Claims……………………………………………………………………………............Description...................………..…..………….….….……………………… Features and Overview ..……………………………...…...….……………….…………………...….…………….. Backside…………………………………………………...…...….……………….…………………...….……………. Installation................…...………………………………………………….…. Set Up and Operation..............……..……………………………………………. Control Modes…………………………………………………………………………………………………….…….. One LED PowerLine (Built-in Programs)…..…………………………………….………………….………..… One LED PowerLine (Sound Control)…………………………………………….……………………….…… Multiple...
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: • LED PowerLine 64 Powercon cable 2m • User manual LED Expected Lifespan LEDs gradually decline in brightness over time.
Page 5
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
The LED Powerline 64 can be placed on a flat stage floor or mounted to any kind of truss by a clamp. Improper installation can cause serious damage to people and property ! Connection with the mains Connect the device to the mains with the power-plug.
Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Description of the device Features LED Powerline 64 is a LED system from Showtec. • Power: 75W • Power consumption: 1 Watt • Power connector: Powercon • LED-System: 64 LEDS (16x Red, 16x Green, 16x Blue, 16x White) • Beam angle: 10-40 degrees •...
Installation Remove all packing materials from the LED Powerline 64. Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty.
Page 10
Multiple Powerlines (DMX Control) 1. Fasten the effect light onto firm trussing Leave at least 1 meter on all sides for air circulation. Always use a safety cable. 3. Use a 3-p XLR cable to connect the Powerlines and other devices. 4.
Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support.
Control Mode The fixtures are individually addressed on a data-link and connected to the controller. The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it, the controller will display the saved DMX address the next time.) DMX Addressing The control panel on the front side of the base allows you to assign the DMX fixture address, which is the first channel from which the Powerline will respond to the controller.
Display Functions When one unit is the master and it has the following functions : Mode Display Operation Instructions 0001 Display ON 0001 Display always ON 0002 Display off after 10 sec 0002 Display will turn off after 10 sec. In this mode, all buttons are not working.
3. If all of the above appears to be O.K., plug the unit in again. 4. If you are unable to determine the cause of the problem, do not open the LED Powerline 64, as this may damage the unit and the warranty will become void.