Entering Programming Mode - Lockly SECURE PLUS User Manual

Hide thumbs Also See for SECURE PLUS:

Table of Contents

3.2 Entering Programming Mode

To end Programming Mode, press the Program button anytime.

Programming Mode will automatically exit if the keypad is inactive for more than thirty (30) seconds.

Number

Add Access Code

Delete Access Code

View Access Code

After entering Programming Mode, you should see

the screen as displayed to the right on your Lockly

keypad. Follow the following steps to add, delete,

or check your Access Codes.

Program Button

Mode

To enter Programming Mode, remove the

battery compartment cover on the interior side

of the Secure to expose the Reset and Program

buttons (See page 8).

Simply press the Program button to enter

programming mode.

Note: Program button will be disabled once

synced to a smart phone. Configure all settings

via synced smart phone. Access Codes previ-

ously added by Programming mode will be

cleared.

SECTION 3.2

Table of Contents

Do you have a question about the SECURE PLUS and is the answer not in the manual?

Secure pro Pgd728f Pgd728w