Adding A Fingerprint - Lockly SECURE PLUS User Manual

3.6 Adding a Fingerprint

In this section, you will learn how to register a fingerprint to your new smart lock.
We are using an advanced biometric sensor, providing the most secure fingerprint authentication.
For security reasons, Lockly will only accept fingerprint patterns that consist of cross intersection
points. Patterns with no cross intersection points will not be acceptable.
Please check your fingers before registration to make sure the finger you want to register will be
acceptable by our system. Otherwise, use an alternative finger to ensure successful registration.
The following examples show which types of fingerprint patterns will be acceptable. It is highly
recommended to enroll at least one finger from each hand in case the hand you are using is
unavailable, such as, in instances like if you are holding items in that hand or have sustained an
injury.
Fingerprint Pattern with Cross Concentric or Parallel Pattern Fingerprint with Scars or Worn
Intersection Lines with no Cross Intersection Lines Out Ridges
OK Not OK Not OK
Your smart lock can register up to ninety-nine (99) fingerprints. Please read the following
sections if you want to add or delete fingerprints. We recommend using your app to add fingerprints,
however, the following section can show you how to add and remove fingerprints if you did not
pair your lock with a smart phone.
16 SECTION 3.6