RAYLASE SUPERSCAN IV-10 Manual page 30

3 PRODUCT DESCRIPTION
3.7.10 Cabling information
To connect the deflection unit to a RAYLASE control card, it is recommended to use original RAYLASE
connection cables. If other connection cables are used, the following description must be strictly
adhered to in order to ensure proper functioning of the system.
3.7.10.1 SL2-100 Interface
The following figure describes the cabling of the SL2-100 interface.
Fig. 14: Cabling of the SL2-100 interface
3.7.10.2 XY2-100 Interface
The following figure describes the cabling of the XY2-100 interface.
Fig. 15: Cabling of the XY2-100 interface
© 2022 RAYLASE GmbH SUPERSCAN IV MN105-en / v1.0.12 30