RAYLASE SUPERSCAN IV-10 Manual page 15

3 PRODUCT DESCRIPTION
3.2.4 Collimator Bracket Set
The optional Collimator Bracket Sets are used to connect a collimator to the deflection unit (see page
Optional
34, Installation with Collimator Bracket Set). The Collimator Bracket Set contains the collimator bracket
as well as the aligning pins and screws in order to connect it to the deflection unit as shown in the
following figures.
Fig. 5: Collimator Bracket Set 002 for connecting a D25
collimator to SUPERSCAN IV-15
3.2.5 Collimator
A collimator produces a beam with parallel rays or in other words a collimated beam. A fibre laser can
Optional
be connected to a RAYLASE deflection unit using a collimator and the corresponding Collimator
Bracket Set (see page 34, Installation with Collimator Bracket Set).
Fig. 7: D25 collimator
A choice of collimators with beam output diameters up to 25 mm (D25) or up to 50 mm (D50) can be
purchased from RAYLASE.
© 2022 RAYLASE GmbH SUPERSCAN IV
Fig. 6: Collimator Bracket Set 001 for connecting a
D50 collimator to SUPERSCAN IV-30
Fig. 8: D50 collimator
MN105-en / v1.0.12 15