RAYLASE SUPERSCAN IV-10 Manual page 16

3 PRODUCT DESCRIPTION
3.2.6 Connections
The SUPERSCAN IV has the following connections:
 to a laser system (mechanical and optical)
 to a focusing unit (e.g. F-Theta lens) (optional – see page 14, F-Theta lens) or
 to a protective window (optional – see page 14, Protective window)
 to a water cooling (optional – see page 31, Requirements for cooling water)
 to an air flush for the mirrors (optional – see page 31, Requirements for cooling air)
The power is supplied to a D-SUB-3W3-M connector. Depending on the model the data signals are
supplied to a D-SUB-25-F or D-SUB-9-F connector (see page 26 ff.).
 Controlled deflection is only possible if the specified power supply is connected. In addition
proper control using the specified control commands must be guaranteed at all times.
© 2022 RAYLASE GmbH SUPERSCAN IV
NOTE
MN105-en / v1.0.12
C1-06 0
16