Astro 25 (P25) Programming Over Project 25 (Pop25); Responding To Upgrade Notifications - Motorola APX 1500 User Manual

Hide thumbs Also See for APX 1500:
Table of Contents

Advertisement

4 To save and return to the Bluetooth feature screen, press Ok.
For Bluetooth devices, the display shows BT.
For Wireless-Pair devices, the display shows WP.
14.4

ASTRO 25 (P25) Programming Over Project 25 (POP25)

Also known as Over-the-Air Programming, this feature allows configuration data and firmware to be
upgraded to your radio over-the-air. Full use of the radio is retained during the data transfer without
interrupting communication.
If the upgrade happens on the ASTRO 25 and ASTRO Conventional systems, the upgrade pauses to
give priorities to voice call, and continues after the voice call ended. If the upgrade happens on a Wi-Fi
network, the upgrade process runs concurrently with voice calls.
Once a configuration upgrade is downloaded to your radio, you can install new changes immediately,
or delay changes to be installed on the radio when it is being powered up.
14.4.1

Responding to Upgrade Notifications

The display shows Upgrade? and a tone sounds every 30 seconds until you accept, delay, or reject
the request.
NOTE: Do not remove the power cable or turn off the radio during the firmware upgrade
process. If your radio has problems upgrading over-the-air, consult a qualified technician for
details.
Procedure:
Respond by performing one of the following actions:
To accept the upgrade request, press Acpt.
To delay the upgrade request, press Dlay.
To reject the upgrade request, press Rej.
One of the following scenarios occurs:
If you choose to accept, the display shows Programming Dont power off. The radio resets to
install the upgrade.
NOTE: The radio cannot be used while the upgrade is being installed. You must ensure to
accept the upgrade at a convenient time.
If you choose to delay, a configuration data upgrade is installed automatically at the next power up.
In the case of a firmware upgrade, the radio prompts Upgrade? again at the next power up.
If you choose to reject, the display shows Upg Aborted. The radio continues to function with the
current configuration until it gets reprogrammed.
68012006035-FA
Chapter 14 : Connectivity
81

Advertisement

Table of Contents
loading

Table of Contents