Disabling The Sensor; Astro 25 (P25) Programming Over Project 25 (Pop25) - Motorola SRX 2200 User Manual

Table of Contents

7.16.2.4

Disabling the Sensor

This feature disables the sensors temporarily or permanently from sending the sensor events to the system.

NOTE: The feature is only applicable to holster sensor and weapon fired sensor. Vest pierced sensor

cannot be disabled.

7.16.2.4.1

Disabling the Sensor Temporarily

Procedure:

Short-press the preprogrammed Sensor button to activate the sensor timer.

The following scenarios affect the sensor state:

●

If a gun or taser is removed from the holster within the timer duration, the timer stops and switches the

sensor to disabled state. A tone sounds and the radio displays Sensor Disable.

NOTE: The radio enables the sensor only when all the guns or tasers are placed into the holster.

A tone sounds and the radio displays Sensor On temporarily.

●

If the timer expires without an event, a tone sounds, the radio switches the sensor to enabled state,

and clears the sensor status from the display.

●

If the preprogrammed Sensor button is long-pressed, the OTA sensor notification is enabled.

7.16.2.4.2

Disabling the Sensor Permanently

Procedure:

1. Long-press the preprogrammed Sensor button to permanently disable the sensors.

A tone sounds and the radio displays Sensor Off. While in this state, no events is reported over-the-

air (OTA), regardless of how many times the gun is drawn, re-inserted or weapon is fired.

The radio generates a bad key tone if the sensor is not allowed to be disabled or there is no sensor

connected to the radio when the preprogrammed button or menu select button is pressed.

2. Long-press the preprogrammed Sensor button again to enable the OTA Sensor notification.

A tone sounds, and the radio displays SNSR OFF.

7.17

ASTRO 25 (P25) Programming Over Project 25

(POP25)

Also called Over-the-Air Programming, this feature allows configuration data and firmware to be upgraded

to your radio over-the-air. Full use of the radio is retained during the data transfer without interrupting

communication.

68012005050-FY

Chapter 7: Advanced Features

Table of Contents