Table of Contents
Advertisement
68012006035-FA
Chapter 14 : Connectivity
If the radio is Wi-Fi connected, the display shows a Wi-Fi Signal Strength indicator
14.3
Bluetooth
®
This feature allows your radio to extend its functionality by connecting to external proprietary Motorola
Solutions accessories. Use Motorola Solutions proprietary Mission Critical Wireless (MCW) devices
with APX radios during Mission Critical operations. Other Bluetooth devices may or may not meet the
mission critical standard.
The Bluetooth hardware resides on the Bluetooth capable radios instead of the Control Head. You are
required to purchase an external Bluetooth/GNSS/Wi-Fi antenna to enable the Bluetooth functionality.
NOTE: APX 5500 AN, APX 6500 AN, APX 6500 Li AN, and APX 7500 radio models do not
support the Bluetooth feature. For other mobile radios, refer to the respective data sheet.
Your radio supports the following Bluetooth enabled devices or profiles:
•
Headset (HSP)
•
Dial Up Networking (DUN)
•
Personal Area Networking (PAN)
•
Serial Port (SPP)
•
Generic Access Profile (GAP)
•
General Attribute Profile (GATT)
In a multicontrol head to one transceiver configuration, one control head must be assigned to Bluetooth
for speaker and microphone interactions.
14.3.1
Turning Bluetooth On or Off
Procedure:
1 Press the BT menu item.
2 Select Status.
3 Perform one of the following actions:
•
To turn on Bluetooth, press On.
•
To turn off Bluetooth, press Off.
14.3.2
Standard Pairing Feature
The Bluetooth Standard Pairing feature enables your Bluetooth enabled radio to search for other
Bluetooth enabled and discoverable devices.
NOTE: Bluetooth tones, Bluetooth menu, and programmed buttons must be programmed by a
qualified radio technician. For more information, contact your system administrator.
When a device is discovered, you can initiate your radio to send a pairing request to pair with the
device.
76
.
Advertisement
Table of Contents
