Under normal conditions, a SmartZone-enabled radio functions invisibly to the operator. However, the
operator does have some manual controls on the Control Head–the RSSI menu entry. This button can
be used to check, or change, the SmartZone operation.
7.5
Site Trunking Feature
If the Zone Controller loses communication with any site, that site reverts to site trunking. When this
occurs, you can communicate only with the radios within your trunking site.
The display shows the currently selected zone or channel, and the site trunking message.
7.6
Site Search
When searching for a site, your radio is inoperable. In the site search mode, your radio scans for
trunked control channels but has yet to connect to the trunking system or reach other trunking states.
Other trunking states are such as Out of Range and Imbalanced Coverage.
The Searching site indicator alerts you that your radio is attempting to search for a valid trunked
control channel.
7.7
Locking or Unlocking Sites
This feature allows your radio to lock onto a specific site and inhibits roaming among wide-area
talkgroup sites.
Procedure:
1 Press the Site menu item.
2 Perform one of the following actions:
1 To lock a site, press Lock.
2 To unlock a site, press Unlk.
The radio saves the new site lock state and returns to the Home screen.
7.8
Viewing the Current Site
Procedure:
1 Perform one of the following actions:
•
Press the programmed Site Search button.
•
Press the RSSI menu item.
2 Press the programmed Site Displ/Srch button.
The display shows the name of the current site and corresponding received RSSI.
7.9
Changing the Current Site
Procedure:
Perform one of the following actions:
68012006035-FA
Chapter 7 : Trunking System Controls
51