Table of Contents
Advertisement
9.10.1
Impact Detected Condition
When your radio detects an impact on the vehicle that meets or exceeds the predefined threshold, your
radio shows the following indications:
•
A tone sounds.
•
The display shows Impact.
•
Post-Alert timer begins.
When the Post-Alert timer expires, your radio enters Emergency mode, and the display shows
Emergency.
NOTE: If the radio is programmed with Silent Emergency, the radio inhibits the alert tone and
visual alert associated with the emergency feature. If the radio is programmed in Surveillance
Mode, the radio inhibits all tones and lights on the radio.
9.10.2
Exiting Impact Detected Condition
Procedure:
Perform one of the following actions:
•
Press the programmed Clear button.
•
Press Clr.
9.11
Sending Evacuation Tones
Procedure:
1 Press and hold the PTT button on the radio keypad mic.
2 Press the Orange button.
A tone sounds when the Orange button is released. The tone sounds in all radios in the talkgroup until
the PTT button is released.
NOTE: The radio does not transmit an evacuation tone if the radio is in secure mode.
68012006035-FA
Chapter 9 : Emergency Operation
63
Advertisement
Table of Contents
