Table of Contents
Advertisement
68012006035-FA
Chapter 10 : Ignition Switch Options
Chapter 10
Ignition Switch Options
The Ignition Switch Options feature is configured in the Customer Programming Software (CPS). The
feature determines the functionality of the radio based on the ignition state of the vehicle.
The following options are available with the Ignition Switch Options:
Blank
This option allows you to turn the radio on or off through the Power button regardless of the ignition
state.
Transmit Inhibit
This option allows you to turn the radio on or off through the Power button regardless of the ignition
state. If ignition is not present, all transmissions including trunking systems are inhibited.
PTT Transmit Inhibit
This option allows you to turn the radio on or off through the Power button regardless of the ignition
state. If ignition is not present, all PTT button transmissions are inhibited. However, the radio is able
to affiliate with the trunking systems.
Required
This option allows you to turn the radio on if ignition is present. The radio turns off through the
Power button press or when ignition is lost.
•
If your radio turns off while the ignition is removed, your radio will automatically turn on when the
ignition is present.
•
If your radio is configured with Auto Power Off Timer, your radio will automatically turn off after
being inactive.
Soft Power Off
This option allows you to turn the radio on through the Power button or when ignition is detected.
•
If the Power button is pressed or the ignition is removed, your radio turns off.
•
If your radio is configured with Auto Power Off Timer, your radio will automatically turn off after
being inactive.
Ignition Only Power Up
In this option, the radio turns on when ignition is detected and turns off when ignition is removed.
•
Your radio will not turn on or off with the Power button press.
•
If your radio is configured with Auto Power Off Timer, your radio will automatically turn off after
being inactive.
NOTE:
If the radio is turned on with an Emergency Power Up footswitch-press, you are required to
press the Power button to turn off the radio even if ignition is not present.
If the radio is previously turned off due to the Auto Power Off Timer, you are required to
press the Power button to turn on the radio even if ignition is present.
10.1
Using Emergency Power Up
Emergency Power Up allows you to turn on the radio and automatically transmit an emergency mode
on personalities with emergency enabled. This feature is not available if the Ignition Switch option is
set to either Tx Inhibit or PTT Tx Inhibit.
64
Advertisement
Table of Contents
