Astro 25 (P25) Programming Over Project 25 (Pop25); Voice Announcement - Motorola APX 8000XE User Manual

MN002667A01-AR
Chapter 6: Advanced Features
• If the timer expires without an event, a tone sounds, the radio switches the sensor to enabled
state, and clears the sensor status from the display.
• If the preprogrammed Sensor button is long-pressed, the OTA sensor notification is enabled.
6.19.9.4.2
Disabling the Sensor Permanently
Procedure:
1 Long-press the preprogrammed Sensor button to permanently disable the sensors.
A tone sounds and the radio displays Sensor Off. While in this state, no events is reported
over-the-air (OTA), regardless of how many times the gun is drawn, re-inserted or weapon is
fired.
The radio generates a bad key tone if the sensor is not allowed to be disabled or there is no
sensor connected to the radio when the preprogrammed button or menu select button is
pressed.
2 Long-press the preprogrammed Sensor button again to enable the OTA Sensor notification.
A tone sounds, and the radio displays SNSR OFF.
6.20

ASTRO 25 (P25) Programming Over Project 25 (POP25)

Also called Over-the-Air Programming, this feature allows configuration data and firmware to be
upgraded to your radio over-the-air. Full use of the radio is retained during the data transfer without
interrupting communication.
If the upgrade happens on the ASTRO 25 and ASTRO Conventional systems, the upgrade pauses to
give priorities to voice call, and continues after the voice call ended. If the upgrade happens on a Wi-Fi
network, the upgrade process runs concurrently with voice calls.
Once a configuration upgrade is downloaded to your radio, you can install new changes immediately or
delay changes to be installed on the radio when it is being powered up.
NOTICE: The Remote Speaker Microphone (RSM) firmware updates are carried out by the
radio. Your radio will not show any notification as the updates are happening in the background.
6.21

Voice Announcement

This feature enables the radio to audibly indicate the current feature mode, zone, or channel assigned
to the user.
The available voice announcement priority options are:
High
Voice announcement is enabled even when the radio is receiving calls.
Low
Voice announcement is disabled when the radio is receiving calls.
66