Table of Contents
Advertisement
68012006035-FA
Chapter 6 : General Radio Operation
Chapter 6
General Radio Operation
This chapter explains the general operations of your radio.
6.1
Selecting Zones
A zone is a group of channels.
Option
Select a zone using the programmed Zone (3-
Position A/B/C) switch
Select a zone using the Zonemenu item
Select a zone using the ZnUp and ZnDn but-
tons
Procedure:
1 Perform one of the following actions:
•
Move the programmed Zone (3-Position A/B/C) switch to the position of the required zone.
•
Press the Zone menu item and select the required zone.
•
Press the Zone menu item and enter the required zone number.
2 Press Sel.
6.2
Selecting Channels
A channel is a group of radio characteristics, such as transmit or receive frequency pairs.
Procedure:
Select radio channels by using the following options.
Option
Selecting radio channels using the Multi-
Function Knob
42
Actions
Move the programmed Zone (3-Position
A/B/C) switch to the position of the required
zone.
NOTE: If the zone number entered
is unprogrammed, the display Model
1.5 shows INVALID, and the display
for Model 2.5 and Model 3.5 shows
Invalid entry. Repeat this step.
Actions
Perform one of the following actions:
•
If the channel is set as the primary mode,
rotate the Multi-Function Knob until the
display shows the required channel.
Advertisement
Table of Contents
