Table of Contents
Advertisement
Set the behavior of the mute/active LED for each transmitter type. Standby mode is always represented with a pulsing red
LED.
Active
Solid Green*
Solid Red
Solid Red
External LED Control
*Not available for MX400R series gooseneck microphones
④ Mute Preference
◦
Local Mute - Individual (default): Each transmitter is muted individually.
◦
Local Mute - All: All transmitters mute when any transmitter is muted.
◦
External Mute: Transmitter audio is on, and muted from a 3rd-party controller.
⑤ RF Power
Determines the RF coverage of an access point.
◦
Low: 25 ft (1mW)
◦
Medium: 50 ft (3 mW)
◦
Medium High: 100 ft (16 mW)
◦
Max: 150 ft (80 mW)
⑥ Out of Range Alarm
When enabled, a transmitter will audibly beep when it is taken out of the RF coverage area. (Disabled by default.)
⑦ Back in Range Action
Transmitters can be set to automatically activate (default) or mute when they re-enter the RF coverage area.
⑧ Standby Mode
◦
Local (default): Transmitter can individually be activated.
◦
Global: All transmitters are activated at the same time from Standby mode.
⑨ Linking Preference
The Link procedure can be restricted to the control software by disabling the hardware Link button on the Networked
Charging Station. By default, the Link button is enabled.
⑩ Identity Preference
Determines the way the transmitter responds when it is identified from the control software:
◦
Enabled: Beeps with flashing LEDs
◦
Disabled: Flashing LEDs only (no sound)
⑪ Permissions
The following describes access rights for each logon:
Mute
Solid Red
Flashing Red
Off
Shure Incorporated
75/100
Advertisement
Table of Contents
