Table of Contents
Advertisement
④ Low Battery LED (Gooseneck and Boundary only)
Color
Off
Solid Red
⑤ Earphone Jack
1/8" (3.5 mm) jack for monitoring a return channel signal, such as translated audio. This audio is automatically routed from
the input(s) of the Audio Network Interface (Input A to channels 1 - 4; Input B to channels 5 - 8).
Note: Not featured on the MXW2 handheld transmitter.
⑥ Charge Connector (USB 3.0 Type A)
Connects to the NCS charger slot or to the USB Charger.
⑦ Handheld Cartridge
MXW2 transmitter is compatible with the following cartridge types: SM58, Beta 58, SM86, VP68.
⑧ Gooseneck Microphone
The gooseneck base is compatible with 5, 10, and 15" Microflex gooseneck microphones.
⑧ TQG Connector
The MXW hybrid bodypack has a TQG connector for an external lavalier or headset microphone.
⑩ Internal Microphone
The bodypack transmitter has an internal, omnidirectional microphone that can be set to automatically engage when not
connected to a lavalier microphone.
Status LED Table
Status
Active
Mute
Standby
Identify
Initialization/ RF channel
acquisition
Out of RF Coverage
Range
Status
>5% battery runtime remains
<5% battery runtime remains
LED
Description
Green
Ready to pass audio to network.
Red
Audio is muted.
Red Pulsing (long
Audio is muted and the transmitter is in a hibernation state to con
off, short on)
serve the battery.
Flashing Yellow
The Identify button has been pressed from the control software.
The transmitter is initializing and acquiring the RF connection to the
linked access point.
Alternating Red and
Green
Standard density mode has a slow alternating rate
High density mode has a fast alternating rate
Red Pulsing (short
The transmitter is out of the RF coverage range to the linked access
on/off)
point.
Shure Incorporated
18/100
Advertisement
Table of Contents
