Table of Contents
Advertisement
4.3.9
Clearing Fault Logs
To Clear the current Fault press the Keylock button until a beep is sounded. This action
moves the Current Fault into the Previous Fault while clearing the Current Fault. To Clear
the Previous Fault press Keylock once more until the beep is sounded.
Warning: Once a fault has been cleared it is permanently removed from Memory and
cannot be recovered.
Press Power to advance to the next mode.
4.3.10 Show Off Mode
This mode initiates a shop show off display and operation demonstration. The LCD
display is Red backlight 'Ad'. The touch switch LED's are - Grn Grn __ Grn Grn.
Press Power to move onto the next mode.
Press Start/Pause to initiate show off mode:
A short series of tones indicates that Show Off mode has been entered. The Show Off
display cycles through every LED, & LCD segment. If any front panel key is pressed the
dishwasher will re-initiate a series of short tones.
Once Show Off mode has been initiated, the mains power must be removed to exit out of
Show Off mode.
4.3.11 Hardware Output Diagnostic Test Mode
This mode tests all the hardware outputs and inputs. The LCD display is Red backlight
and 'HO'.
Press Power to skip hardware diagnostics and advance to the next mode.
Press Start/Pause to enter hardware diagnostics.
Once hardware diagnostics has been entered the current hardware output being tested is
indicated in green on the touch switch panel, using binary encoding, and also on the LCD
as shown below.
Any combination of outputs can be switched on or off. Load sensing is enabled when the
motor is running.
Press Start/Pause to advance to next hardware output.
Press Keylock to turn the currently displayed output On or Off. If the currently displayed
output has a green backlight then that output has been switched on, and if the backlight is
red then that output is off.
Press Power to Exit at any time (All outputs will be switched off on exit).
The LCD display and touch switch panel green LED's are illuminated to correspond to a
particular hardware device. The following table details the display order of the test.
- 19 -
Advertisement
Table of Contents
