Table of Contents
Advertisement
3.14
Wiring Cover
The wiring cover protects the customer from the 120V mains supply which passes over
the link assembly and under the lockring to the front of the tub. It also serves to protect
the motor assembly, drain and fill hoses from damage when opening and closing drawers.
The wiring cover acts as a cosmetic part of the product.
4.0
DIAGNOSTICS
4.1
Setup & Diagnostics
The DishDrawer comes with comprehensive fault codes and built in diagnostics, to save
the user & service person time and worry, if the dishwasher ever exhibits a fault.
4.2
Fault Modes
The faults are displayed in the LCD as one of 10 F (fatal) faults or one of 10 U (user)
faults. A Fatal fault will usually require the assistance of a qualified service person, while
many User a faults are simply blockages or installation errors, easily fixed by the user. In
the Integrated models, an LCD is not available, and faults are indicated by a Red center
LED, with the fault number indicated on the touch switch panel with Red LED's. The
indication below for the Touch Switch Panel is from left to right, with '_' meaning the LED
is Off, and '#' meaning the LED is On. A fatal fault is accompanied by a continuous
pulsating beep, while a user fault is accompanied by a more pleasant continuous pulsating
tone pattern. The last two faults are logged into EE memory, with 8 bytes of information
logged to aid location of the fault. These bytes are available for interrogation by a PC if
required. The following faults have been implemented in the DishDrawer.
To clear any fault press the Power button. If the fault is still present then it cannot be
cleared.
- 16 -
Advertisement
Table of Contents
