Wiring Cover; Diagnostics; Setup & Diagnostics; Fault Modes - Fisher & Paykel DD601 Service Manual

3.14

Wiring Cover

The wiring cover protects the customer from the 240V mains supply which passes over the link
assembly and under the lockring to the front of the tub. It also serves to protect the motor assembly,
drain and fill hoses from damage when opening and closing drawers. The wiring cover acts as a
cosmetic part of the product.
4.0

DIAGNOSTICS

4.1 Setup & Diagnostics
The DishDrawer comes with comprehensive fault codes and built in diagnostics, to save the user &
service person time and worry, if the dishwasher ever exhibits a fault.
4.2

Fault Modes

The faults are displayed in the LCD as one of 8 F (fatal) faults or one of 3 U (user) faults. A Fatal
fault will usually require the assistance of a qualified service person, while many User a faults are
simply blockages or installation errors, easily fixed by the user. In the Integrated models, an LCD
is not available, and faults are indicated by a Red center LED, with the fault number indicated on
the touch switch panel with Red LED's. The indication below for the Touch Switch Panel is from
left to right, with '_' meaning the LED is Off, and '#' meaning the LED is On. A fatal fault is
accompanied by a continuous pulsating beep, while a user fault is accompanied by a more pleasant
continuous pulsating tone pattern. The last two faults are logged into EE memory, with 8 bytes of
information logged to aid location of the fault. These bytes are available for interrogation by a PC if
required. The fault codes shown on Pages 20/21 have been implemented in the DishDrawer.
To clear any fault press the Power button. It the fault is still present then it cannot be cleared.
- 14 -