Optionally Hard Wiring The Product - Fisher & Paykel DS605 Installation Instructions Manual

OPTIONALLY HARD W R NG THE PRODUCT
Ensure the drawer is removed
and then rotated counter-
clockwise to prevent kinked
hoses.
©
(150 ram)
Remove Power supply
\\
Remove knock-out for cable
clamp. Fit suitable cable clamp
for the conduit and terminate
the wiring as shown.
Ensure the drawer clips ' *'
on both sides are reset. F_
Ensure the drawer is
now rotated
clockwise back.
,_ ........ (14
Before refitting the drawer, j/ .....
/
ensure the hoses are not __'
twisted and the latches at
the rear of each drawer t/J
runner are facing forward. _-t_ /