Security (Security Menu) - ProMinent S1Cb Operating Instructions Manual

Set-up

8.7.4 Security (SECURITY menu)

Main menu
Mode
Settings
Service
Information
Language
Continuous
display
8.7.4.1 Access protect.
8.7.4.2 Password
8.7.4.3 Using Access protect and Password
Test
Overriding the Access protect.
62
Service
Clear counters
Display
HMI logout
Security
End
'SECURITY' menu, you can enter for which parts of the adjustment
In the
'Access protect' should apply and a 'password' be specified.
options an
This menu itself is ALWAYS password protected.
As supplied the 'password' is "1111".
In the first menu option, you can either set
'Lock menu' or 'Lock all' :
'None' , to clear a set 'Access protect' .
Select
n
'Lock menu' to lock the adjustment mode (point ① in the over‐
Select
n
view "Operating/setting diagram", in the appendix).
'Lock all' to lock the adjustment option for the directly adjust‐
Select
n
able variables in the continuous displays and to lock the stroke length
(point ② in the overview "Operating/setting diagram", in the appendix),
in addition to the adjustment mode.
If an Access protect is then set after 1 minute a padlock will
appear instead of the " i " in the top left of the continuous dis‐
play if in the meantime no key has been pressed.
In this menu enter the number you want to use as a password.
The password applies for both locks.
To test whether the menu is locked, press the
If you try to change into a locked area, a
To override the Access protect, enter the
[arrow keys] and press the [P/OK] key.
Security
Access protect.
Password
End
'None' ( 'Access protect' ) or
[P/OK] key for 2 s.
'Password' request appears.
'Password' using the
Access protect.
none
Lock menu
Lock all
Password
2683