Connecting To Wi-Fi Networks - Motorola LEX L10i User Manual

MN003475A01-B
Chapter 11: Wireless
• Wireless Equivalent Privacy (WEP)
• Wi-Fi Protected Access (WPA)/WPA2 Personal (PSK)
• Extensible Authentication Protocol (EAP)
- Protected Extensible Authentication Protocol (PEAP) — with Microsoft Challenge-Handshake
Authentication Protocol version 2 (MSCHAPv2) and Generic Token Card (GTC) authentication.
- EAP-Transport Layer Security (TLS)
- EAP-TTLS - with Password Authentication Protocol (PAP), MSCHAP and MSCHAPv2
authentication
The Status bar displays icons that indicate Wi-Fi network availability and Wi-Fi status.
NOTICE: Turn off Wi-Fi when not using it, to extend the life of the battery.
11.2.1

Connecting to Wi-Fi Networks

Connecting to a Wi-Fi network allows you to establish a wireless Internet connection on your device.
NOTICE: Your device remembers Wi-Fi networks to which it connects, and resumes the
connection automatically when in range.
Procedure:
1 From the Home screen, tap
2 Adjust the Wi-Fi slidebar.
The device searches for WLANs in the area and lists them.
3 Scroll through the list and select the desired WLAN network.
4 Connect to the network by performing one of the following:
If...
If you want to connect to an open net-
work,
If you want to connect to a secure net-
work,
NOTICE: For more information on connecting to secure Wi-Fi networks, see
to Secure Wi-Fi Networks on page
The LEX device obtains a network address and other required information from the network
using the dynamic host configuration protocol (DHCP).
5 Verify whether the network displays as Connected.
146
→ → Wi-Fi.
Then...
tap the network and select Connect to net-
work.
perform the following actions:
a Tap the network name.
b Enter password or other necessary cre-
dentials.
c Tap Connect.
147.
Connecting
Send Feedback