Download Print this page

Motorola LEX L10 Quick Start Manual

Mission critical handheld
Hide thumbs Also See for LEX L10:

Advertisement

Quick Links

LEX L10
MISSION CRITICAL
HANDHELD
QUICK START GUIDE

Advertisement

loading

Summary of Contents for Motorola LEX L10

  • Page 1 LEX L10 MISSION CRITICAL HANDHELD QUICK START GUIDE...
  • Page 2 LEX L10...
  • Page 3: Getting Started

    Getting Started NOTE: The LEX L10 may be delivered to you with SIM card and microSD card already installed, activated and ready for use. In this case, ignore steps 2 and 3.
  • Page 4 1. Slide the card into the card holder slot with con- tacts facing down. 1. Hold the LEX L10 firmly as shown. 2. Push the card into the slot until it is fully seated 2. Using the battery cover removal slot, gently lift and locked into place.
  • Page 5 2. Insert the battery (bottom first) into the battery seated and flat. compartment with the battery contacts facing the bottom of the LEX L10. 3. You should hear a click when the SIM card is fully in place. 3. Press the top of battery into place.
  • Page 6 NOTE: Ensure rubber flaps for USB port and 5. The charge and notification LED turns solid red, headset jack are firmly seated when those con- indicating the battery is charging. When the bat- nectors are not in use. tery is fully charged, the LED turns solid green. 4.
  • Page 7 Using the Front Panel Keys Locking and Securing Unlocking the Screen 1. Press the Power button to wake up the LEX L10. 2. Slide off the • Back: Press to display the previous screen. screen. Closes the keyboard if the on-screen keyboard is open.
  • Page 8: The Home Screen

    The Home Screen Adding Widgets to the Home Screen The Motorola 1. On the Home screen, press an hold an empty Solutions Home area. Experience (MHx) is 2. Tap Widgets. the engine that 3. Press and hold the desired widget, drag it to the drives the user Home screen, and then release it.
  • Page 9 Pair the LEX L10 with LMR Radio • If the pairing process fails, the radio sounds a short, low pitched This feature allows the LEX L10 to pair with and tone. remotely control a P25 Land Mobile Radio (LMR). Once a successful pairing is established, the...
  • Page 10: Connecting To A Wifi Network

    Connecting to a WiFi Network To connect the LEX L10 to WLAN Network: 1. On the Home screen, tap 2. Tap and set the WiFi option to ON. 3. Tap a WiFi network and enter Username and Password information if required.
  • Page 12 Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. The Bluetooth trademarks are owned by their proprietor and used by Motorola Solutions, Inc. under license. All other trademarks are the property of their respective owners.