Enabling Cast Screen; Projecting The Lex Screen On Another Device; Sound And Notification Settings; Adjusting Sound Settings - Motorola LEX L10i User Manual

MN003475A01-B
Chapter 2: Getting Started
2.11.8

Enabling Cast Screen

When and where to use: Use this procedure to enable the LEX device to project the screen to a TV or
other device.
Procedure:
1 From the Home screen, tap
2 Tap .
3 Tap Display.
4 Tap Cast.
5 Tap .
6 Select Enable wireless display.
2.11.8.1

Projecting the LEX Screen on Another Device

Prerequisites: Cast screen must be enabled. For more information, see
page 54.
When and where to use: Use this procedure to project the device screen on another device.
Procedure:
1 From the Home screen, tap
2 Tap .
3 Tap Display.
4 Tap Cast.
5 Select the device on which you want to show your device screen.
Your device should now display on the other device.
6 To stop projecting your device screen, swipe down from the Status bar and tap Disconnect
under Cast.
2.12

Sound and Notification Settings

Sound and notification settings allow the user to configure default media, alarm, and ring volume levels
and ringtones. The user can adjust notification settings.
2.12.1

Adjusting Sound Settings

Sound settings allow user to adjust media, alarm, and ring volume.
Procedure:
1 From the Home screen, tap
2 Tap .
54
.
.
.
Enabling Cast Screen on
Send Feedback