Information For The Operator - Borger STE-RSM2 Operating Manual

1.3

Information for the operator

8
The operating manual is an integral part of the control unit. The
operator (i.e. the responsible party) is responsible for making the
operating personnel aware of this manual.
Additionally, the operator is obligated to ensure the notice and
observance of national regulations for accident prevention and
environmental protection, plus the notice and observance of
supervision and reporting duties taking special operational
aspects into account, e.g. regarding work organization, work
processes and personnel.
Aside from the operating manual and the currently valid accident
prevention regulations in the country of operation and at the
installation site, all recognized special regulations for safe and
proper operation must be observed.
The operator is not permitted to make or arrange for any changes,
modifications or alterations to the control unit without approval
from Börger GmbH. This includes any changes to the
programming beyond the settings described in the following
chapters.
Any spare parts used must comply with the technical
requirements specified by Börger GmbH. This is always
guaranteed when original spare parts are used.
Only original spare parts may be used during the warranty period,
failing which the warranty is void.
Only trained or instructed personnel may be assigned to operate,
maintain, repair or transport the control unit. Clearly define the
personnel responsible for operation, maintenance, repair and
transportation.
www.boerger.de / www.boerger.com
General Information
BA-STE-RS, 26.09.2014