Proper Use - Borger STE-RSM2 Operating Manual

Safety
2.3

Proper use

BA-STE-RS, 26.09.2014
Notice
Indicates a possible hazardous situation or unsafe, dangerous
work processes that may lead to damage to the machine or
surrounding area.
Note
Offers useful information on safe and proper operation.
●
Bullet points describe work and / or operational steps. These
steps must be carried out from the top down.
— Indents indicate lists.
All instructions and symbols attached directly to the control unit
and the units controlled by it (e.g. warning signs, operational
signs, all component designations etc.) must be strictly adhered
to.
They may not be removed and must be kept completely legible.
Some of the diagrams used in this operating manual, which are
only used to illustrate a particular work step, show a different type
of control unit. However the work step is the same.
The STE-RS reversing control unit serves the purpose of
preventing and removing slight blockages of a connected
macerator caused by fiber materials.
An integrated motor protection protects the motor of the
connected macerator from damage through overload. In the event
of an overcurrent, the STE-RS switches off the connected
macerator.
An emergency stop switch additionally allows the operator to bring
the macerator to an immediate standstill.
It is possible to connect an external control unit (optional for some
versions).
www.boerger.de / www.boerger.com 11