Cleaning The Outside Of The Operating Terminal During Operation; Cleaning The Inside; Maintenance And Inspection - Borger STE-RSM2 Operating Manual

6.1.2

Cleaning the outside of the operating terminal during operation

6.1.3

Cleaning the inside

6.2

Maintenance and inspection

66
If the operating terminal is to be cleaned while the control unit is
switched on, the program Cleaning screen must be activated to
prevent touching the screen causing changes to the settings.
For this work step, the set-up user password is required or you
have to be logged in as set-up user already.
●
Touch the Setting field (4) to open the relevant settings menu.
●
Touch the field marked with an arrow facing towards the right
until the menu shown (4.4) appears.
●
Touch the Cleaning screen (P) field.
The input function of the screen is switched off for a period of 20
seconds. A cleaning image appears that indicates the remaining
duration of the cleaning phase.
●
During this time, clean the display using suitable agents
(screen cleaner, anti-static cloth).
●
If necessary, repeat the input lock by touching the Cleaning
screen field again.
●
Observe the warnings in chapter 6.
●
Keep the interior free of dust and dry.
●
If necessary, use a compressed air spray to clean the inside,
e.g. the DEKRA-approved Dust Off 67 compressed air spray
from CRC Kontakt-Chemie.
●
Only use lint-free, anti-static cleaning cloths.
●
Observe the warnings in chapter 6.
www.boerger.de / www.boerger.com
Maintenance and Repairs
BA-STE-RS, 26.09.2014