Setting The Date And System Time; Checking The Direction Of Rotation - Borger STE-RSM2 Operating Manual

5.1.3

Setting the date and system time

5.1.4

Checking the direction of rotation

52
The system time shown on the display can be corrected in order
to adapt it to the local time, daylight saving time, or after longer
power cuts.
For this work step, the set-up user password is required or you
have to be logged in as set-up user already.
●
Select the Setting menu by touching the relevant field.
●
Go to menu 4.4.
●
Select the Time submenu (Q).
●
Touch the entry field System time adjustment.
●
Enter the new value using the keyboard that opens and
confirm the input with Return.
●
Accept the set time by touching the Time setting field.
If a Multicrusher or Rotorrake or any pumps are connected, the
direction of rotation of the motors according to the operating
manuals of the components and the drive manufacturer must be
verified in Inching operation.
This verification is possible without a password.
Note
In Inching operation, the motors of connected components
start immediately without having to operate the Start button
when touching the Forwards and Backwards selection fields.
www.boerger.de / www.boerger.com
Operation
BA-STE-RS, 26.09.2014