Marking And Signs On The Ste-Rs Control Unit - Borger STE-RSM2 Operating Manual

Safety
2.6

Marking and signs on the STE-RS control unit

(The data provided are for illustrative purposes only. Here,
they refer to a Multichopper P150 control unit.)
BA-STE-RS, 26.09.2014
Meaning:
The control unit manufacturer's nameplate
Location:
In a clearly visible position on the control
cabinet door inside the control cabinet
1)
Different address possible, e.g. when delivered through a
subsidiary.
Meaning:
The control cabinet manufacturer's nameplate
Location:
In a clearly visible position on the inside of the
control cabinet door
Meaning:
The filter fan hood manufacturer's nameplate
Location:
In a clearly visible position on the filter fan
hood
Meaning:
Marking of electronic components / circuits
(the first number marks the page in the circuit
diagram)
Location:
In a clearly visible position on the relevant
components in the control cabinet
Meaning:
Emergency stop switch (red on yellow)
Location:
At the front of the control cabinet
www.boerger.de / www.boerger.com 15