Cleaning The Outside Of The Control Cabinet - Borger STE-RSM2 Operating Manual

Maintenance and Repairs
6.1.1

Cleaning the outside of the control cabinet

BA-STE-RS, 26.09.2014
Notice
Improper cleaning can result in malfunctions and damage!
Do not use water jets.
Do not use aggressive cleaning agents, solvents or sandpaper,
as these can damage the metallic and plastic surfaces, paint
and seals.
Do not use metal objects such as scrapers and screwdrivers for
cleaning.
Never clean sensitive components with hard scrubbing and
strong mechanical pressure.
Do not use high pressure, a vacuum cleaner or a hand brush
with plastic bristles etc. to clean the inside because the
production of static electricity can damage the electronic
components.
In particular, keep moisture away from all the electronic
components.
Observe the operating manuals of the manufacturers of the
electronic components in respect of care and maintenance.
●
Only clean the outside of the control cabinet by wiping or
brushing it. Use lint-free, anti-static cleaning cloths / hand
brushes with natural bristles.
●
When required, use a standard aqueous industrial cleaner.
●
Keep all markings on the control cabinet in a legible state at all
times.
www.boerger.de / www.boerger.com 65