Table of Contents
Advertisement
Phoning
• Your system administrator must grant you silent intrusion rights.
• Silent intrusion may infringe on your national data protection provisions
or be permitted only under certain circumstances. If you intend to use
this function, you should therefore notify your call party in advance.
Activating silent intrusion (the users are talking):
1. Press the function key for
2. Enter the call number of the user you want as per the key configuration.
➔
The function is activated.
➔
If the user has blocked intrusion, connection set up will be cancelled.
Answering silent intrusion:
There are neither display nor sound signals on your phone to indicate silent
intrusion.
Using further functions
This section explains some more convenient features provided by
your phone. All functions you can save under a configurable key can
be found in chapter "Overview of available functions", page 56.
Activating personal call routing
You want to specify which of your phone shall ring when you receive a call.
You can specify the phone on which a call is signaled with personal call
routing.
Your system administrator set up multiple phones with the same phone
number in the one number user concept for you (see chapter"One number
user concept", page 8). The system administrator has also assigned you
permission to configure routing in the Self Service Portal. This allows you
to set up 5 routings in the Self Service Portal for a range of situations
("Office", "Home Office", "On the road").
You can only answer a call on the phone on which the call is signaled. If
you have not configured a call routing, the default setting (all phones are
ringing) is used as standard.
The following options are available on your phone for further editing of per-
sonal call routing:
50
Silent
intrusion.
Mitel 6920 SIP
eud-1763/2.1 – R6.0 – 10.2018
Advertisement
Table of Contents
