Mitel MIVOICE OFFICE 400 6920 SIP User Manual page 36

Phoning
Private calls:
1. Enter function code #46 for a private call.
2. Enter your internal phone number.
3. Enter your PIN.
4. Enter the external call number directly, without the exchange access digit.
5. Pick up the handset.
➔
The phone is now enabled; the external user is called.
Note: The default PIN setting '0000' is not accepted (for more information on the PIN,
see chapter "Changing the PIN", page 84).
Automatic call waiting in case of internal user
You would like to talk to an internal user whose line is currently busy.
By using the function Automatic call waiting, this user in informed that you
would like to talk to him. When you use the call waiting function, the user
receives a call waiting tone (duration and frequency of the tone depend on
system settings) and your phone number or name appear on their display.
The user may accept or refuse your call.
Requirements:
• Your system administrator must authorise you to use the function call
waiting in the MiVoice Office 400 communication system.
• The internal user must not have blocked the function call waiting on
their phone (see chapter "Activating protection against call types",
page 86 for configuration).
Note: If the user is making an enquiry call or is in a conference, the function
Automatic call waiting cannot be used.
Call waiting:
The person you want to talk to is busy. The phone automatically executes the
function call waiting.
Note: If the user declines the call request or if the function call waiting cannot be exe-
cuted, the connection is terminated (busy tone) or the call is redirected to a pre-
defined phone, depending on the system configuration.
36
Mitel 6920 SIP
eud-1763/2.1 – R6.0 – 10.2018