Table of Contents
Advertisement
Keys, display, and menu guidance
figured than can be displayed. The More key is needed to switch between
the key levels. The number of dots indicates the number of levels as well
as on which level you currently are.
A menu can have several sub-menus. Press the suggested softkey to
access the sub-menu or the selection of available editing options or to
carry out an action.
Free configurable keys
Your phone is equipped with freely configurable keys. Popular functions
are set for a specific configurable key by default by your system adminis-
trator (see "Function key configuration (default key setting) - Overview",
page 19). The remaining configurable keys can be configured with a spe-
cific action type: Call number, function, KT line, busy lamp field. The KT
lines and the busy lamp fields can be configured only on the top softkeys
and the keys of an expansion key module.
As soon as you have configured more keys than can be displayed, the
More key (
levels as well as relative position. Press the More key in order to switch
from one level to another.
The key configuration is not made directly on the phone. Available settings
for the key configuration:
• MiVoice Office 400 communication system: The configuration is
made by your system administrator in the communication system.
• Self Service Portal: You can use the Self Service Portal (see chapter
"MiVoice Office 400 Self Service Portal", page 9) where you can config-
ure, change, or delete the keys.
For information about freely configurable keys, see the chapter "Configur-
ing keys", page 90.
Note:
A key that you have configured locally on your phone can not be displayed
or overwritten in the Self Service Portal. Therefore, always configure your
keys using the Self Service Portal of the MiVoice Office 400 communica-
tion server.
18
) will appear. The number of dots indicates the number of
Mitel 6920 SIP
eud-1763/2.1 – R6.0 – 10.2018
Advertisement
Table of Contents
