Table of Contents
Advertisement
Phoning
If your system administrator has set up one phone number for several
phones (see "One number user concept", page 8),you can use Ring Alone
to define on which phone a call will be signaled acoustically. As soon as
you activate Ring Alone on one phone, the ring tone is deactivated for all
other phones. An incoming call is signaled in the display of all phones. You
can answer the call on any of the phone; once the call is answered, other
phones go back to the idle state.
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 91).
Note:
When you have activated ring alone but deactivated the personal call rout-
ing for a phone in parallel, an incoming call is not acoustically but only
visually signaled.
Activating/deactivating ring alone
Press the function key for
➔
Function is activated/deactivated, LED on the function key is switched on/off.
Locking/Unlocking your phone
You need to leave your desk and want to ensure that no-one can alter your
phone's settings, look at your private data, or make calls from your phone.
You can lock your phone with a 2 to 10-digit PIN (for more information on
the PIN, see chapter "Changing the PIN", page 84).
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 91).
Activating the phone lock:
Press the function key for
➔
The phone is locked and can only be unlocked using your PIN.
in the status line.
52
Ring Alone
on/off.
Phone lock
on/off.
is displayed
Mitel 6920 SIP
eud-1763/2.1 – R6.0 – 10.2018
Advertisement
Table of Contents
