Mitel MIVOICE OFFICE 400 6920 SIP User Manual page 19

Function key configuration (default key setting) -
Overview
The phone on the MiVoice Office 400 communication system is delivered
with the default function key configurations summarized in the following
table. Note that your system administrator might change the default config-
uration and your phone configuration might therefore differ from the default
configuration.
Function key Mitel 6920 SIP
Key T1 Personal Line 1
Key T2 Personal Line 2
Key T3-T20 Empty
Key S1 System menu
Key S2 Call forwarding menu
Key S3 Take (pick up own call)
Key S4 Empty
Key S5 Call routing menu
Key S6 Phone lock on/off
Key S7 Request a callback
Key S8-S18 Empty
Overview alphanumeric keyboard
The alphanumeric keyboard has a dialpad with digits from 0 through 9, a *
key, and a # key. Of these, keys 2 through 9 contain letters of the alphabet.
These dialpad keys can be used for entering digits, password, text, and
special characters, and also for quickdial. You can use the alphanumeric
keyboard to dial a phone number to make a call and to press keys as
required by an Interactive Voice Response (IVR) system. Press the rele-
vant key repeatedly until the character you want is displayed.
The alphanumeric keypad is set to the characters listed in the following
table.
1)
Please note that actual key configuration depends on which keypad is used.
2)
Please note that the actual character selection is dependent on the language
selected.
Mitel 6920 SIP
eud-1763/2.1 – R6.0 – 10.2018
2)
Keys, display, and menu guidance
Mitel 6920 SIP if defined as free seat-
ing phone
Personal Line 1
Personal Line 2
Empty
System menu
Free seating: Log in/ Log out
Request a callback
Empty
Empty
Empty
Empty
Empty
1)
19