Table of Contents
Advertisement
UPS5000-A-(400 kVA-500 kVA)
User Manual (40 kVA Power Modules)
Advanced Param.
Figure
Figure 4-22 Advanced Param. screen 1
Figure 4-23 Advanced Param. screen 2
Issue 06 (2020-01-10)
Cell float voltage, Cell equalized volt, Float volt. temp. comp. coef., and EOD voltage threshold
are set for cells.
4-22and
Figure
4-23shows the Advanced Param. screen.
Working mode
The value can be Normal mode (default), Converter mode, Self-load mode, or ECO.
BSC mode
The value can be Non-BSC mode (default) or BSC mode. The latter is set when the
−
system is a dual-bus system.
−
A dual-bus system consists of one master and one slave BSC system. You can
specify them during initial startup and change the settings under the guidance of
maintenance engineers. Set the master and slave BSC systems to master and slave
BSC modes respectively.
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
110
Advertisement
Table of Contents
