Yamaha CZD250-A Owner's Manual page 98

Periodic maintenance and adjustment
1
1
1. Screw
4. Remove the air filter case bolts.
9
1
1. Bolt
5. Lift up the air filter case slightly, re-
move the rear wheel sensor lead
from the holder, and then remove
the V-belt case cover.
2 2
1
1. Rear wheel sensor lead
2. Lead holder
6. Remove the V-belt case air filter
cover by removing the bolts.
2
1
2
1. V-belt case air filter cover
2. Bolt
9-17
7. Remove the air filter element, and
then blow out the dirt with com-
pressed air from the clean side as
shown.
1
1. V-belt case air filter element
1. Clean side
8. Check the V-belt case air filter ele-
ment for damage and replace it if
necessary.
1