Yamaha CZD250-A Owner's Manual page 63

NOTICE
Use only the specified tires. (See
page 9-19.) Using different sized
tires will prevent the traction control
system from controlling tire rotation
accurately.
Resetting the traction control sys-
tem
The traction control system will auto-
matically disable under certain condi-
tions; such as when a sensor fault is
detected, or when only one wheel is al-
lowed to rotate for more than a few
seconds. Should this
the " " indicator light will come on,
and possibly the " " warning light,
too.
ECA16801
1
1. Traction control system indicator "
2. Engine trouble warning light "
TIP
When the vehicle is on the centerstand,
do not rev the engine for an extended
happen,
period of time. Otherwise, the traction
control system will automatically dis-
able and need to be reset.
If the traction control system automat-
ically disables, try resetting it as fol-
lows.
1. Stop the vehicle and turn it off
completely.
2. Wait a few seconds and then turn
the vehicle power on.
3. The " " indicator light should
turn off and the system be en-
abled.
6-25
Instrument and control functions
TIP
If the " " indicator light remains on
after resetting, the vehicle may still be
ridden; however, have a Yamaha deal-
er check the vehicle as soon as possi-
ble.
4. Have a Yamaha dealer check the
vehicle and turn off the "
2
warning light.
"
"
"
6