Yamaha CZD250-A Owner's Manual page 69

2 3
1. Bracket number plate
2. Bolt
3. Collar
2. Remove the bolt access covers by
removing the quick fasteners.
2
1. Quick fastener
2. Bolt access cover
3. Remove the windshield by remov-
ing the bolts.
1
1
1. Bolt
4. Remove the bolts, and then install
the bolts in the desired position.
1
1 1. Bolt
5. Install the windshield to the high
position by installing the bolts, and
then tighten the bolts to the spec-
ified torque. WARNING! A loose
windshield could cause an acci-
6-31
Instrument and control functions
dent. Be sure to tighten the
screws to the specified torque.
[EWA15511]
1
1. Bolt
Tightening torque:
Windshield bolt:
7 N·m (0.7 kgf·m, 5.2 lb·ft)
6. Place the bolt access covers, and
then install the quick fasteners.
1
7. Place the bracket number plate
and then install the bolts with col-
lars.
To change the windshield height to
the low position
1. Remove the bracket number plate
by removing the bolts with collars.
1
6