Yamaha CZD250-A Owner's Manual page 76

For your safety – pre-operation checks
T I E M
Rear brake
Throttle grip
Control cables
7
Wheels and tires
Brake levers
Centerstand, sidestand
Chassis fasteners
Instruments, lights, signals
and switches
Sidestand switch
C
Check operation.
If soft or spongy, have Yamaha dealer bleed hydraulic system.
Check brake pads for wear.
Replace if necessary.
Check fluid level in reservoir.
If necessary, add specified brake fluid to specified level.
Check hydraulic system for leakage.
Make sure that operation is smooth.
Check throttle grip free play.
If necessary, have Yamaha dealer adjust throttle grip free play and lubricate ca-
ble and grip housing.
Make sure that operation is smooth.
Lubricate if necessary.
Check for damage.
Check tire condition and tread depth.
Check air pressure.
Correct if necessary.
Make sure that operation is smooth.
Lubricate lever pivoting points if necessary.
Make sure that operation is smooth.
Lubricate pivots if necessary.
Make sure that all nuts, bolts and screws are properly tightened.
Tighten if necessary.
Check operation.
Correct if necessary.
Check operation of ignition circuit cut-off system.
If system is not working correctly, have Yamaha dealer check vehicle.
H E C K S
7-2
P A G E
9-21, 9-22, 9-22
9-18, 9-25
9-24
9-19, 9-21
9-25
9-26
—
—
6-34