Yamaha CZD250-A Owner's Manual page 46

Instrument and control functions
Average fuel consumption (AVG
FUEL)
Instantaneous fuel consumption
(INST FUEL)
Trip timer (TRIP TIME)
Air temperature (AIR)
Coolant temperature (COOLANT)
Battery voltage (BATTERY)
Use the " "/" " switches to scroll
up/down the list of items.
Short press the " " switch to open the
menu system and navigate to "
6
tings" "Information / Reset"
hicle info." to reset individual items.
(See page 6-18.)
TIP
While on the vehicle information home
screen, long pressing the " " switch
shortcuts to "
"Information / Reset"
in the menu system.
Average speed (AVG SPEED)
Displays the average traveling speed
since last reset.
Average fuel consumption (AVG FUEL)
When using kilometers, the average
fuel consumption display can be set to
"km/L" or "L/100km" (page 6-18).
When using miles, the average fuel
consumption is displayed in "MPG".
Instantaneous
(CRNT FUEL)
When using kilometers, the instanta-
neous fuel consumption display can be
Set- set to "km/L" or "L/100km" (page
"Ve- 6-18). When using miles, the instanta-
neous fuel consumption is displayed in
"MPG".
Trip timer (TRIP TIME)
Displays the running time (Main switch
ON) since the timer was manually re-
Settings"
set.
"Vehicle info."
Air temperature (AIR)
The air temperature is displayed from –
9 °C (16 °F) to 50 °C (122 °F) in 1 °C (1
°F) increments. The temperature dis-
played may vary from the actual ambi-
ent temperature.
TIP
fuel consumption
Coolant temperature (COOLANT)
The coolant temperature is displayed
from –30 °C (–22 °F) to 125 °C (257 °F)
in 1 °C (1 °F) increments.
TIP
6-8
"---" will be displayed if the de-
tected temperature is lower than –
9 °C (16 °F).
"---" will be displayed if the de-
tected temperature is higher than
50 °C (122 °F).
If the vehicle coolant temperature
is below –30 °C (–22 °F) the cool-
ant temperature display will read
"–30".
If the vehicle coolant temperature
exceeds 125 °C (257 °F) the cool-
ant temperature display will con-
tinue flashing to read "Hi".
The coolant temperature warning
light will come on if the coolant
temperature exceeds 125 °C (257
°F).