Adafruit ESP32-S3 Manual page 7

• Step 1. Download the factory-reset-and-bootloader.bin file
• Step 2. Enter ROM bootloader mode
• The WebSerial ESPTool Method
• Connect
• Erase the Contents
• Program the ESP32-S2/S3
• The esptool Method (for advanced users)
• Install ESPTool.py
• Test the Installation
• Connect
• Installing the Bootloader
• Reset the board
• Older Versions of Chrome
• The Flash an Arduino Sketch Method
• Arduino IDE Setup
• Load the Blink Sketch
Install UF2 Bootloader
Downloads
• Files
• Schematic and Fab Print
FAQ
©Adafruit Industries
260
261
262
Page 7 of 263