Stemma Qt; Buttons - Adafruit ESP32-S3 Manual

STEMMA QT

This JST SH 4-pin
allows you to connect to
() or to other things
STEMMA QT or Qwiic sensor/device. You can also use it with Grove I2C devices
thanks to this handy
There is a power pin that must be pulled high for the STEMMA QT connector to work.
This is done automatically by CircuitPython and Arduino. The pin is available in
CircuitPython and in Arduino as
If you run into I2C or TFT power issues on Arduino, ensure you are using the
latest Espressif board support package. If you are still having issues, you may
need to manually pull the pin HIGH in your code.

Buttons

©Adafruit Industries
STEMMA QT () connector breaks out I2C (SCL, SDA, 3.3V, GND). It
various breakouts and sensors with STEMMA QT
using assorted associated
cable ().
TFT_I2C_POWER
accessories (). It works great with any
.
connectors
Page 22 of 263