Adafruit ESP32-S3 Manual page 230

WipperSnapper Setup
The WipperSnapper firmware and ecosystem are in BETA and are actively being
developed to add functionality, more boards, more sensors, and fix bugs. We
encourage you to try out WipperSnapper with the understanding that it is not
final release software and is still in development.
If you encounter any bugs, glitches, or difficulties during the beta period, or with
this guide, please contact us via http://io.adafruit.com/support
What is WipperSnapper
WipperSnapper is a firmware designed to turn any WiFi-capable board into an
Internet-of-Things device without programming a single line of code. WipperSnapper
connects to Adafruit
to display, respond, and interact with your project's data.
Simply load the WipperSnapper firmware onto your board, add credentials, and plug it
into power. Your board will automatically register itself with your Adafruit IO account.
From there, you can add components to your board such as buttons, switches,
potentiometers, sensors, and more! Components are dynamically added to hardware,
so you can immediately start interacting, logging, and streaming the data your
projects produce without writing code.
©Adafruit Industries
IO (), a web platform designed (by Adafruit! ())
Page 230 of 263