Adafruit ESP32-S3 Manual page 176

Wiring the MAX98357A
Connect the MAX98357A breakout to your microcontroller as follows.
©Adafruit Industries
Adafruit I2S 3W Class D Amplifier
Breakout - MAX98357A
Listen to this good news - we now have
an all in one digital audio amp breakout
board that works incredibly well with the
https://www.adafruit.com/product/3006
Mono Enclosed Speaker with Plain Wires -
3W 4 Ohm
Listen up! This single 2.8" x 1.2"
speaker is the perfect addition to any
audio project where you need 4 ohm
impedance and 3W or less of power. We...
https://www.adafruit.com/product/4445
Premium Male/Male Jumper Wires - 20 x
6" (150mm)
These Male/Male Jumper Wires are handy
for making wire harnesses or jumpering
between headers on PCB's. These
premium jumper wires are 6" (150mm)
long and come in a...
https://www.adafruit.com/product/1957
Page 176 of 263