Adafruit ESP32-S3 Manual page 247

On the component configuration page, the AHT20's I2C sensor address should be
listed along with the sensor's settings.
The AHT20 sensor can measure ambient temperature and relative humidity. This
page has individual options for reading the ambient temperature, in either degree
Celsius or degree Fahrenheit, and the relative humidity. You may select the readings
which are appropriate to your application and region.
The Send Every option is specific to each sensor measurement. This option will tell
the Feather how often it should read from the AHT20 sensor and send the data to
Adafruit IO. Measurements can range from every 30 seconds to every 24 hours.
For this example, set the Send Every interval for both seconds to Every 30 seconds
and click Create Component.
©Adafruit Industries Page 247 of 263