Download Print this page

Adafruit Intermediate Soldering Pack Manual

Download this manual

Want to learn soldering but

don't know where to start?

This pack is perfect for the

maker who's looking to learn

how to solder or simply hone

their skills. Each pack comes

with essential soldering tools

and kits, hand chosen by

Ladyada, that will get you

started on your soldering

journey.

SKILLS:

Arrow.com.

Downloaded from

soldering, component identification, optional programming.

Intermediate

Soldering Pack

KIT CONTENTS:

 ADJUSTABLE TEMPERATURE

16W-30W 110V SOLDERING IRON

 SOLDERING IRON STAND

 0.5MM SOLDER

 FLUSH DIAGONAL CUTTERS

 ADAFRUIT METRO 328 BRAID

 MINTYBOOST KIT

 MINIPOV4 KIT

Need help?

Do you have a question about the Intermediate Soldering Pack and is the answer not in the manual?

Page 1  0.5MM SOLDER their skills. Each pack comes  FLUSH DIAGONAL CUTTERS with essential soldering tools  ADAFRUIT METRO 328 BRAID and kits, hand chosen by  MINTYBOOST KIT Ladyada, that will get you  MINIPOV4 KIT started on your soldering journey.
Page 2 Soldering Basics New to soldering? Follow the guides on arrow.com or learn.adafruit.com to start forming perfect solder joints every time. As a refresher: Heat your Clean the board Place your soldering iron to with isopropyl components and about 700 alcohol to remove bend the leads That’s about ¾...
Page 3 Solder down the headers on an Adafruit METRO 328 board. The Adafruit METRO board uses the Atmega 328, a favorite core that also resides on the Arduino boards. This board allows you to use 3.3V logic if desired and uses a Micro-USB port.
Page 4 AA batteries. (Tin, batteries, and cable not included.) The Adafruit MintyBoost® Kit converts the 3V from two AA batteries into a regulated 5V supply suitable for powering devices like phones, mp3 players, and boards like the Adafruit METRO.
Page 5 8-bit color. (Tin, batteries, and cable not included.) The Adafruit MiniPOV4 kit can be assembled without any external guidance, as the value and orientation for each component is clearly marked on the PCB. Like the MintyBoost® Kit, you will want to solder down the IC socket rather than the IC itself. Just don’t forget to insert the IC before powering on the kit –...

3209