Adafruit ESP32-S3 Manual page 10

This Feather comes with native USB and 4 MB Flash + 2 MB of PSRAM, so it is perfect
for use with CircuitPython or Arduino with low-cost WiFi. Native USB means it can act
like a keyboard or a disk drive. WiFi means it's awesome for IoT projects. And Feather
means it works with the large community of Feather Wings for expandability.
The ESP32-S3 is a highly-integrated, low-power, 2.4 GHz Wi-Fi/BLE System-on-Chip
(SoC) solution that has built-in native USB as well as some other interesting new
technologies like Time of Flight distance measurements and AI acceleration. With its
state-of-the-art power and RF performance, this SoC is an ideal choice for a wide
variety of application scenarios relating to
electronics (), and smart homes.
The BLE implementation in CircuitPython for the ESP32-S3 is still under
development and has limitations. Currently, your program can act as a central,
and connect to a peripheral. You can advertise, but you cannot create services.
You cannot advertise anonymously. Pairing and bonding are not supported.
©Adafruit Industries
the Internet of Things (IoT) (), wearable
Page 10 of 263