Adafruit ESP32-S3 Manual page 211

Once the sketch begins running, you should see something like the following.
That's all there is to reading battery data from the LC709203 using Arduino!
WiFi Test
Thanksfully if you have ESP32 sketches, they'll 'just work' with variations of ESP32.
You can find a wide range of examples in the File->Examples->Examples for Adafruit
Metro ESP32-S2 subheading (the name of the board may vary so it could be "Example
s for Adafruit Feather ESP32 V2" etc)
Let's start by scanning the local networks.
Load up the WiFiScan example under Examples->Examples for YOUR BOARDNAME-
>WiFi->WiFiScan
©Adafruit Industries Page 211 of 263